DC MEMS Accelerometer range

Available in monoaxial, biaxial and triaxial variants
From 2 to 50g

← Back to full accelerometer range

cable-web magnetic-mount-web stud-mount-web email icon purple accel finder2 charge amp1

 Cables & 
 Connectors       

 Magnets & 
 Mountings     

 Mounting
 Studs            

 Send an
 enquiry           

Accelerometer
Finder  

Charge
Amplifier 

 

Model

  Sensitivity

 g Range

  Weight

  Temp. Range

memAM/2.1000 

 
   100.2mV/(m/s2) 
   1000mV/g
  

± 2g  

  
 22gm
   0.78oz


 -40ºC to +85°C
 -40ºF to +185°F

memAM/2HR.1000

   100.2mV/(m/s2)
   1000mV/g

 ± 2g  

  
  22gm
    0.78oz


 -40ºC to +85°C
 -40ºF to +185°F

mem AM/5.300

   30.6mV/(m/s2)
   300mV/g

 ± 5g   22gm
    0.78oz		  -40ºC to +85°C
 -40ºF to +185°F

memAM/10HR.200

   20.4mV/(m/s2)
   200mV/g

 ± 10g  


    22gm
    0.78oz


 -40ºC to +85°C
 -40ºF to +185°F

mem

AM/20.100

 10.2mV/(m/s2)
   100mV/g		 ± 20g    22gm
    0.78oz		 -40ºC to +85°C
 -40ºF to +185°F 

mem

AM/50HR.40

 4.0mV/(m/s2)
   40mV/g		 ± 50g    22gm
    0.78oz		  -40ºC to +85°C
 -40ºF to +185°F

mem

 AMB/2.1000  

 100.2mV/(m/s2)
   1000mV/g		 ± 2g    23gm
    0.78oz		  -40ºC to +85°C
 -40ºF to +185°F

mem

 AMB/2HR.1000

 100.2mV/(m/s2)
   1000mV/g		 ± 2g    40gm
    0.78oz		  -40ºC to +85°C
 -40ºF to +185°F

mem

 AMB/5.300

 30.6mV/(m/s2)
   300mV/g		 ± 5g    23gm
    0.78oz		  -40ºC to +85°C
 -40ºF to +185°F

mem

 AMB/10HR.200

 20.4mV/(m/s2)
   200mV/g		 ± 10g    40gm
    0.78oz		 -40ºC to +85°C
 -40ºF to +185°F 

mem

AMB/20.100

 10.2mV/(m/s2)
   100mV/g		 ± 20g    23gm
    0.78oz		 -40ºC to +85°C
 -40ºF to +185°F 

mem

 AMB/50HR.40

 4.0mV/(m/s2)
   40mV/g		 ± 50g    40gm
    0.78oz		  -40ºC to +85°C
 -40ºF to +185°F

mem

AMT/2.1000

 10.2mV/(m/s2)
   1000mV/g		 ± 2g    23gm
    0.81oz		 -40ºC to +85°C
 -40ºF to +185°F 

mem

AMT/2HR.1000

 100.2mV/(m/s2)
   1000mV/g		 ± 2g    40gm
    1.41oz		  -40ºC to +85°C
 -40ºF to +185°F

mem

AMT/5.300

 30.6mV/(m/s2)
   300mV/g		 ± 5g    23gm
    0.78oz		  -40ºC to +85°C
 -40ºF to +185°F

mem

AMT/10HR.200

 20.4mV/(m/s2)
   200mV/g		 ± 10g    40gm
    0.78oz		 -40ºC to +85°C
 -40ºF to +185°F 

mem

AMT/20.100

 10.2mV/(m/s2)
   100mV/g		 ± 20g    23gm
    0.78oz		 -40ºC to +85°C
 -40ºF to +185°F 

mem

AMT/50HR.40

 4.0mV/(m/s2)
   40mV/g		 ± 50g   40gm
    0.78oz 		 -40ºC to +85°C
 -40ºF to +185°F 

The AM range of accelerometers are MEMS (micro electro mechanism system) DC response voltage output devices for testing at low frequency vibration measurement from DC (0Hz) and above. They are single axis variable capacitance design and are available with a 3m integral cable fitted with a 7 pin connector to suit the DJB DCM-03 MEMS signal conditioning unit or alternatively as bare wires. 

Ideally suited to low frequency vibration applications including low level vibration where high sensitivity is required.

Due to their ability to measure DC response they can also be used to measure constant gravity application.

The AM/2HR.1000 has a range of 2g and a sensitivity of 1000mV/g, it has a higher resolution than the standard AM/2.1000. We recommend using with DJB's MEMS signal conditioner the DCM-03


 

 

Feature: