Transducer Interface Converts Acceleration to Velocity • Input Range 1/100pC/g O/Ps 100mV/g & 1V/mm.sec. (max)
The CA/04/V is a 1/100pC/g normalising charge amplifier with noise limiting 10Hz 4 pole high pass filter and single integrator. Integrator converts periodic acceleration above the filter corner frequency to velocity. Integrator gain can be controlled controlled over 50dB dynamic range by 6 position switch.
The Charge Amplifier Provides wideband 100mV/g acceleration proportional output when normalised, transducer sensitivity range 1/100pC/g, by means of ten-turn dial and x1, x10 multiplier.
Features
- Noise limiting high pass filter.
- Internal Integrator Converting Acceleration to Velocity.
- Variable output with x1 and x10 multiplier control.