Piezoelectric Accelerometer - A/22
26pC/g nom. • 12gm • 250°C Max. Temp.
The Konic shear sensing element of the A/22 incorporates a mechanically isolated central sleeve that comprises part of the transducer casing, thus providing an annular through hole for attachment.
The feature allows 360º connector orientations and minimizes height, thus facilitating installation. In addition all welded construction and total absence of epoxies maximizes reliability and temperature range.
The A/22 provides an output comparable that of the A/20, with the advantage of 50% reduced height and total freedom of cable orientation.
Features |
Applications |
|
Insulated mounting kit SI/22 included. Provides electrical
isolation, hence minimising common mode interference |
Modal Analysis of lightweight structures |
Charge Amplifiers
Charge Output Accelerometers require a Charge Amplifier to convert the charges from the vibration sensor to a voltage, readable by front end instrumentation or vibration analysers.
The CA/04/N variant of the CA/04 Series of Charge Amplifiers is best suited for use with the A/22. The CA/100 Miniature Charge Amplifier may be suitable for some applications.
Calibration
All DJB Accelerometers are calibrated on site prior to despatch, and are accompanied by a calibration chart with temperature and frequency responses listed. Periodic calibration can be carried out with our VC-01 Handheld Calibrator whilst we also offer a full calibration service including cross axis checks to aid accuracy of data. We are able to provide this service for all makes of accelerometer with a full report given for each device. Please contact us with an enquiry
Cable Assembly and Repair Service
• Cable Repair Service to make current cabling as good as new, cutting costs whilst good for the environment
• Specialist Cable Assembly - for all manufacturers
• Cable and connector stock held for a quick turnaround
Click here for more information
