Miniature Piezoelectric Accelerometer - A/24/E, A/24/TE, A/24/TS

5pC/g nom. • 2gm • 250°C Max. Temp.

View Datasheets>

A three variant range of low mass (2gm.) accelerometers with Konic  shear sensing elements, welded construction, miniature (3.5mm thd.) side or top entry coaxial connector and titanium case. 
The two adhesive mount versions (A/24/E, A/24/TE), are provided with bonded isolation discs to minimize ground loop interference, whilst the top entry connector version (A/24/TS) is also available with integral mounting stud but without isolation.

Charge Amplifiers

Charge Output Accelerometers require a Charge Amplifier to convert the charges from the vibration sensor to a voltage, readable by front end instrumentation or vibration analysers.

The CA/04/N variant of the CA/04 Series of Charge Amplifiers is best suited for use with the A/24. The CA/100 Miniature Charge Amplifier may be suitable for some applications.

Calibration

All DJB Accelerometers are calibrated on site prior to despatch, and are accompanied by a calibration chart with temperature and frequency responses listed. Periodic calibration can be carried out with our VC-01 Handheld Calibrator whilst we also offer a full calibration service including cross axis checks to aid accuracy of data. We are able to provide this service for all makes of accelerometer with a full report given for each device. Please contact us with an enquiry 

Cable Assembly and Repair Service

• Cable Repair Service to make current cabling as good as new, cutting costs whilst good for the environment
• Specialist Cable Assembly - for all manufacturers
• Cable and connector stock held for a quick turnaround

Click here for more information