Industrial Piezo-Tronic IEPE Accelerometer - A/1107/F

100mV/g • 185°C max • 85gm (exc. cable) • 2 pole connector

A107

 

View Datasheet

 Industrial grade IEPE accelerometer with integral two wire charge/voltage converter (QVC), providing a standardized 100mV/g output. Signal output is floating, via 2 pole hermetic connector, thus minimizing common mode interference. Transducers and cables can be supplied proof pressure tested to 80bar, individually and as assemblies. They are also for use in hostile environments including fluid immersion.  Pressure tested assemblies may be disconnected for ease of installation, subsequently replacing the sealing ring between the connector shells.  Internal electrical connections are welded. Pressure and thermal cycle tests are recommended for hostile environment applications. Construction Konic shear sensor/hybrid thick film QVC electrically isolated with output via two pole hermetic connector. All welded case, suitable for immiscible applications.

Features

Applications
  • Rugged Design with Integral Hardline Cable.
  • High Temperature operation up to 400°C.

Options

  • Temperature calibration to 185°C
  • Proof pressure testing to 80bar
  • Charge Output Version.
 

With it's high sensitivity and high temperature tolerance, the A/1107 is the ideal candidate for machine monitoring, conditon monitoring, heavy industrial and aerospace applications.

For applications requiring temperatures higher than 185°C, a Charge Output version is available (A/107) which can tolerate temperatures of up to 400ºC.

Calibration

All DJB Accelerometers are calibrated on site prior to despatch, and are accompanied by a calibration chart with temperature and frequency responses listed. Periodic calibration can be carried out with our VC-01 Handheld Calibrator whilst we also offer a full calibration service including cross axis checks to aid accuracy of data. We are able to provide this service for all makes of accelerometer with a full report given for each device. Please contact us with an enquiry 

Cable Assembly and Repair Service

• Cable Repair Service to make current cabling as good as new, cutting costs whilst good for the environment
• Specialist Cable Assembly - for all manufacturers
• Cable and connector stock held for a quick turnaround

Click here for more information