Triaxial Modal Piezo-Tronic IEPE Clip Mounted Accelerometer AT/13

1mV/g up to 100mV/g (±10%). • 23gm • 185°C Max. Temp.AT13

 

View Datasheet

 The AT/13 has been d eveloped primarily for the Modal Analysis and Structural test marketplace with particular focus on the Automotive and Aerospace markets. The slotted sides and a slotted base allow it to be mounted on 5 of its faces by sliding into the accompanying clip. Users can then mount the clips using normal glue methods and slide the accelerometers in and out of the clip as required. This ensures perfect repeatability for tests without the need for leaving the accelerometer in situ. In addition, for large channel count testing, all accelerometers can be mounted in the same orientation making software set up easier.
Manufactured in Titanium for low mass and long life, the AT/13 has three individual Konic Shear sensing elements internally mounted in the three orthogonal axes; this provides excellent performance in each axis with minimal cross axis effects.
The AT/13 is available as charge output or as IEPE voltage output. Clip part number CL/01 can be ordered separately. Clip part number CL/01 can be ordered separately. Also available is the CL/02 which has a thicker base and can be modified to suit specific user applications.

Features

Applications
  • Adhesive Mounting, or clip mouting with CL/01.
  • Low mass Titanium design.
  • KONIC Shear Sensing Element.
  • Operating Temperature of up to 185°C (HT Version), 125°C Standard.
  • 1mV/g or 100mV/g Sensitivity (±10%).

Options

  • Wideband temperature calibration
  • Available in Charge or Voltage Output
  • Clip Mounting with part no. CL/01 or CL/02 (not included).

Modal Analysis of lightweight structures

Automotive

Aerospace

Vibration Shaker Testing

Impact Testing

Industrial

Calibration

All DJB Accelerometers are calibrated on site prior to despatch, and are accompanied by a calibration chart with temperature and frequency responses listed. Periodic calibration can be carried out with our VC-01 Handheld Calibrator whilst we also offer a full calibration service including cross axis checks to aid accuracy of data. We are able to provide this service for all makes of accelerometer with a full report given for each device. Please contact us with an enquiry 

Cable Assembly and Repair Service

• Cable Repair Service to make current cabling as good as new, cutting costs whilst good for the environment
• Specialist Cable Assembly - for all manufacturers
• Cable and connector stock held for a quick turnaround

Click here for more information

.